Silberhorn is looking forward to participating once again as a co-exhibitor at ENCOMA at the Precision Fair - the leading trade fair for precision technology in Europe. Every year, this event attracts…
On 14 November 2024, Silberhorn will have its own stand at the "Smart Manufacturing Solutions" expert forum at Schwäbische Werkzeugmaschinen GmbH in Schramberg-Waldmössingen. Bernd Lorscheider, Area…
This small but mighty machine was designed for the toughest jobs:
Two years ago, the Silberhorn MWS 4 was a focal point of the CleanTec Days. This multi-washing system (MWS) was the main topic of discussion at the Silberhorn open house. At this year’s CleanTec Days,…
How to find the best filter for your parts cleaning and reduce operating costs.
Step 1: Create a checklist
Define the decisive criteria for filter selection. Take a look at: Part properties, required…
Would you have guessed it: filter inserts for parts cleaning systems are little-regarded operating resources, but they harbour great savings potential.
Replacing the installed standard filter with a…
Are you struggling with rust on steel parts? Let us assist:
Industrially manufactured steel components are prone to rust. For example, due to production defects (standing for a long time, standing too…
We are proud to announce that Silberhorn Maschinenbau GmbH has successfully passed recertification in accordance with the renowned EN ISO 9001 standard. This confirms our commitment to the highest…
In order to save valuable resources and operating materials when cleaning parts, users pay attention to the right choice of cleaning process, temperature, water pressure and cleaning agents.
Of…
The most minute shavings and impurities are produced when grinding metallic components. These have to removed with certainty after grinding. The process chosen for this purpose is industrial parts…
We are delighted to welcome a new member to our sales team: With Audrey Kleinhentz, we have gained an experienced colleague for Silberhorn sales in FRANCE and in French-speaking SWITZERLAND.
Audrey…
At Silberhorn, we clean exclusively on an aqueous basis. To do this, water is usually mixed with neutral detergent and sprayed onto the components under pressure. The soiled cleaning fluid is then…
Everyone is aware that components need to be cleaned properly. But the subsequent drying of the parts also plays a major role. This is precisely where a lot of time and energy can be saved if you do…
Small bores and undercuts, constantly changing shapes and geometries - industrial components are a constant challenge for us when it comes to cleaning them reliably.
Our latest answer?
We have…
In all Silberhorn Maschinenbau GmbH machines, the containers with the cleaning liquids are particularly well insulated. Always, and at no extra charge.
Thanks to its fine inner cell structure, the…
We wish you all a wonderful Christmas, a peaceful and reflective festive season and a peaceful start to the New Year.…
Cleaning process, temperature, water pressure and cleaning agent: Numerous parameters determine whether a system is optimised for the parts to be cleaned and reliably achieves the required level of…
The contract cleaning department is significantly expanding its capacities with a robot cell. Fully automated and highly flexible, the system can be used to clean various parts, including very large…
We are excited to announce that we will be participating in Precision Fair 2023 together with our partner ENCOMA B.V. This top-class trade fair for the entire precision technology value chain will…
![[Translate to Englisch:]](/fileadmin/_processed_/9/f/csm_00_piggy-bank-saving-money-handling-animal-figure-plastic-1556537-pxhere.com_725be20f56.jpg "[Translate to Englisch:]")
As with all other companies, our manufacturing costs are rising, so that we are unfortunately forced to increase our prices as of 01.01.2024. So if you are thinking about ordering a Silberhorn…
In the Netherlands, Belgium and Luxembourg, you can now obtain competent and comprehensive advice on Silberhorn cleaning systems directly on site - through our new partner ENCOMA B.V. ENCOMA B.V. has…
Which cleaning process is the best for my components? Which machine is suitable for our company? Who is able to clean our parts on a contract basis for a transitional period?
The Silberhorn team will…
For the machine manufacturer Silberhorn, an extremely successful parts2clean is coming to an end. The manufacturer reports several useful discussions – both with already known customers and with many…
In a cleaning system, the filter has an impact on the service life of the baths (i.e. on how long a cleaning fluid can be used) and thus on the cleanliness of the components. In addition, it is…
A successful parts2clean is coming to an end. We were able to have many good conversations – with already known customers and also with new companies that gave us the opportunity to present ourselves…
On the very first day of Parts2Clean, the Acktar managment team, Israel, decide on a Silberhorn MWS. No, wait, not just any - but our trade fair machine. They came, fell in love with the machine and…
The cleanliness requirements for high-tech components are increasing. To ensure the right quality, 100 percent of the impurities generated in the manufacturing process must be removed. The keyword…
Fred Bornschlegl is the new Chief Financial Officer (CFO) of Silberhorn Maschinenbau GmbH. Previously, the 52-year-old from Regensburg was already on board the company as commercial director.
From September 13 to 17, 2022, Maschinenbau Silberhorn will be presenting industrial cleaning machines for metal parts on an aqueous basis, including the new Silberhorn MWS.